31萬平方米！CIMT2025將首次同時使用首都國際會展中心和中國國際展覽中心（順義館）
31萬平方米！
CIMT2025將首次同時使用首都國際會展中心
和中國國際展覽中心（順義館）
第十九屆中國國際機床展覽會（CIMT2025）將于2025年4月21-26日在北京舉辦。中國國際機床展覽會（CIMT）由中國機床工具工業協會主辦并與中國國際展覽中心集團有限公司共同承辦，是中國知名度最高、規模最大、影響力最廣的機床工具專業展覽會；是被國際業界公認的與歐洲EMO、美國IMTS、日本JIMTOF齊名，不可錯過的四大國際機床名展之一。CIMT2025展會自今年6月份招展工作啟動以來，得到了境內外展團、展商的積極響應，報名參展踴躍。截至11月25日，共有來自28個國家和地區的2800余家企業申報參展，申報凈面積近19萬平方米，其中境外展區有800余家企業申報參展，申報凈面積超過5萬平方米；境內展區有2000余家企業申報參展，申報凈面積超過13萬平方米。
CIMT2025展會原計劃只使用首都國際會展中心，展館總面積21萬平方米，可使用展位凈面積10萬多平方米，只能滿足境內外展商面積需求的50%左右，面積缺口很大。為解決面積嚴重不足的問題，主辦方經過多方協調和溝通，最終決定CIMT2025展會將首次同時使用首都國際會展中心和中國國際展覽中心（順義館）。兩個展館同時使用，CIMT2025展會的總規模將超過31萬平方米，預計可使用展位凈面積約16萬平方米，展商的面積滿足率可達到80%左右，CIMT展會長期以來面積嚴重不足的困境將得到緩解，廣大行業企業的參展需求將得到較好的滿足。
首都國際會展中心和中國國際展覽中心（順義館）南北毗鄰。CIMT2025展會期間，兩個展館將貫通連接，聯動運營。當然，兩個展館同時使用也將使交通、進撤館操作、水電氣供應等面臨較大壓力，對展會主承辦方、展館和各服務商來說都將是極大的挑戰。在此，也希望得到境內外展團、展商的理解和積極配合。主辦方將聯合展館、各合作單位，通力合作，努力做好展會的各項組織籌備和服務工作，為大家呈現一場展現當今全球機床工具業界最前沿的新產品、新技術、新工藝的行業盛會！
來源：中國機床工具工業協會
310,000 Square Meters！ CIMT2025 will, for the First Time,
Simultaneously Utilize Both Capital International Exhibition Center of China (CIECC)
and the China International Exhibition Center (Shunyi Hall)
The 19th China International Machine Tool Show (CIMT2025) will be held from April 21 to 26, 2025, in Beijing. CIMT is sponsored by China Machine Tool & Tool Builders’ Association (CMTBA) and co-organized with China International Exhibition Center Group Limited (CIEC), it is the most renowned, largest, and the most influential professional machine tool exhibition in China. It is internationally recognized as one of the four major global machine tool exhibitions, alongside EMO in Europe, IMTS in the United States, and JIMTOF in Japan. Since the exhibition’s recruitment process began in June this year, it has received enthusiastic responses from domestic and overseas pavilions and exhibitors. As of November 25th, over 2,800 companies from 28 countries and regions have applied to participate, with a total requested net exhibition area of nearly 190,000 square meters. This includes over 800 overseas companies, requesting more than 50,000 square meters, and more than 2,000 domestic companies, requesting over 130,000 square meters.
CIMT2025 was originally planned to use only Capital International Exhibition Center of China (CIECC), which offers a total exhibition area of 210,000 square meters and a net usable exhibition area of just over 100,000 square meters. However, this could only satisfy about 50% of the area demand from domestic and overseas exhibitors, leaving a significant shortage. To address this issue, the sponsor has coordinated extensively and ultimately decided that CIMT2025 will, for the first time, simultaneously utilize both Capital International Exhibition Center of China (CIECC) and the China International Exhibition Center (Shunyi Hall). With the two venues combined, CIMT2025 will have a total scale exceeding 310,000 square meters, with an estimated net usable exhibition area of approximately 160,000 square meters. This will meet about 80% of exhibitors' area demands, significantly alleviating the long-standing issue of insufficient exhibition space and better accommodating the participation needs of the enterprises in this field.
Capital International Exhibition Center of China (CIECC) and the China International Exhibition Center (Shunyi Hall) are located adjacent to each other, forming a north-south connection. During CIMT2025, the two venues will be seamlessly linked and jointly operated. However, the simultaneous use of both venues will impose considerable pressure on traffic, move-in and move-out operations, and utilities such as water, electricity, and gas. These challenges will require significant efforts from the sponsor and organizers, venue operators, and service providers. We sincerely hope for the understanding and active cooperation of all domestic and overseas pavilions and exhibitors. The sponsor will work closely with the venues and all partnering units to ensure thorough preparations and services, aiming to present an industry event showcasing the latest cutting-edge products, technologies, and processes in the global machine tool industry.
Source: CMTBA
